How to connect HP Deskjet 3510 to Wi-Fi?

HP Deskjet may be wired or wireless. Wireless printers give you more freedom because you do not need to attach your computer with the Wi-Fi source. It is not necessary to remain within the same room; you can move around with your laptop quickly. Whereas in wired printers, there should be a wired connection with Wi-Fi source so that the distance from the Wi-Fi source matters.

Step by step method

If you have bought a new printer, then start unpacking it and connecting it with the power source; now install the Ink cartridges and load the paper and the input tray. If it is a wired printer, then connect the printer with your computer or laptop, and if it is a wireless connection, you need to install the driver on your computer.

HP Deskjet 3510 to Wi-Fi
  • First, you should prepare your printer for installation. Now switch on your printer and put it in the setup mode. Now use the printer control panel and click the cancel and wireless button simultaneously to wake up the printer for setup.
  • Secondly, you need to install the printer software on your device. for this purpose, open the web browser and go to the printer setup to download it.
  • Now run the software on your computer, and it would automatically detect your HP Deskjet 3510.
  • Now you need to restore the default setting of the wireless printer for this purpose; press the power button of the printer to start. Now, connect the HP wireless with the computer software setup. A list of instructions would appear on your screen; follow them to install HP Deskjet 3510 wireless.
  • The third step is to install the software and printer driver. Go to the startup page and then select 'download.' After it is downloaded, select open 'HP easy start.'
  • Now click on the set up my HP option and then select 'accept' to proceed with the setup.
  • A connection screen would be displayed on your computer, select your required printer and then select the option of 'continue.'
  • Now add the information required and then allow the network connection, then click 'add printer.'
  • Your wireless printer has now been connected to your device and is ready to use.

Tips for a better connection

To have a better connection of the printer with a Wi-Fi source, keep in mind the following things:

Connect HP Deskjet 3510 to Wi-Fi
  • There should be a good Wi-Fi connection in the case of a wireless printer especially.
  • The Wi-Fi router and your laptop all computer must be switched on.
  • Before starting the actual installation process, make sure that the paper is filled in the printers' input tray and a new ink cartridge or a filled ink cartridge is installed in it.
  • To establish a new connection, disconnect all the old connections and any other extra USB cables installed in it.
  • For better accessibility of Wi-Fi sources, there should be less distance between the wireless printer and the Wi-Fi device.

That's it for today. After connecting it to WiFi, if you find that the printer is encountering issues, like hp officejet 3830 not printing, check out the linked guide for troubleshooting.

Adios!

Click Here to Leave a Comment Below 0 comments

Leave a Reply: